Home / Services / Offshore & Wave Load Analysis

Hydrodynamics, Wave Loads & Floating Stability

Offshore & Wave Load Analysis

We support offshore and marine engineering decisions using hydrodynamic analysis, floating-body response, mooring assessment, wave loading, stability checks and practical recommendations for harsh sea environments.

Analyze Offshore Structure View Media

6-DOF

Motion Response

RAO

Wave Response

Mooring

Line Loads

Stability

CG & Inertia

Offshore Simulation Visual

Floating Offshore Platform

Open Source

Floating offshore wind turbine foundation visual reference

Review offshore loads, hydrodynamic response, structural behaviour and operational risk through clear simulation visuals.

Wave Loads

Mapped

Mooring

Checked

Stability

Reviewed

What The Service Means

We Translate Sea-State Loads Into Engineering Decisions

Offshore hydrodynamic analysis evaluates how floating or fixed marine structures respond to waves, currents, wind and operational loads. The goal is to understand motion, stability, mooring response and critical load cases before fabrication, installation or design approval.

Our workflow turns marine conditions into practical outputs: RAO trends, time-domain motions, mooring tensions, load envelopes, center-of-gravity checks, inertia validation and recommendations for platform improvement.

01 / Define

Sea States & Geometry

Define platform geometry, mass properties, draft, water depth, wave spectrum, current and environmental assumptions.

02 / Solve

Hydrodynamic Response

Calculate motions, RAOs, added mass, damping, diffraction effects and time-domain response where needed.

03 / Check

Mooring & Stability

Review mooring line tension, restoring behaviour, center of gravity, inertia and critical stability concerns.

04 / Deliver

Clear Report

Deliver annotated visuals, result tables, load case comparison and engineering recommendations ready for decision-making.

Service Capabilities

What We Can Analyze

The service is structured to support offshore design decisions, not just produce marine plots. Each analysis connects environmental loading to stability, response and practical design action.

Wave Load Analysis

Regular and irregular wave effects, current loading, wave headings and load envelopes for design comparison.

6-DOF Floating Response

Surge, sway, heave, roll, pitch and yaw response for floating platforms, vessels and offshore wind concepts.

Mooring Line Assessment

Mooring arrangement review, line tensions, offsets, fatigue-sensitive trends and restoring behaviour.

CG & Inertia Audits

Center of gravity, mass distribution and moment-of-inertia checks for complex floating assemblies.

Extreme Load Cases

Storm sea states, survival conditions, wave impact concerns and screening of critical design scenarios.

Design Iteration

Compare hull shapes, drafts, mooring concepts, ballast assumptions and platform configurations.

Offshore Service Workflow

Offshore Hydrodynamics Explained With Real Web Media

Offshore simulation visuals and embedded videos explain hydrodynamic analysis context and expected engineering outputs.

Practical Meaning

Hydrodynamic analysis turns ocean loading into design evidence.

Instead of treating the sea as one simple load, we evaluate how wave direction, period, amplitude, current and wind conditions change the response of the offshore structure.

The outputs help answer whether a floating structure remains stable, whether mooring lines are overloaded, whether motions are acceptable and which load cases govern the final design.

The final deliverable is a report that connects plots, videos and response tables to engineering decisions: ballast changes, mooring updates, hull modifications or additional structural checks.

01

Sea State

02

Response

03

Decision

▶

Embedded Web Video

Ansys Aqwa Hydrodynamic & Fatigue Workflow

The embedded video highlights hydrodynamic setup, wave direction/frequency coverage and structural follow-up concepts.

Original YouTube source →

Rogue wave computer model impacting a semisubmersible platform

Wave Impact

Extreme Wave Screening

Shows why offshore structures require dynamic and hydrodynamic checks when waves become nonlinear or extreme.

Open image source →

Semi-submersible floating offshore wind turbine foundation

Floating Wind

Floating Platform Stability

Floating offshore wind concepts require mass-property, draft, stability and mooring-response review.

Open image source →

Offshore Structure

Fixed & Floating Assets

Offshore assets often require combined wave, current and wind loading assessment.

Open image source →

Jacket Foundations

Wave Forces on Support Structures

Explains hydrodynamic loading on slender support frames, piles and offshore jacket systems.

Open image source →

Ocean Ranger offshore platform wave reference diagram

Risk Context

Extreme Event Awareness

Highlights the importance of ballast, stability, freeboard and operational assumptions in severe offshore conditions.

Open image source →

Short Work Preview

Wave Flume Hydrodynamic Test

A compact work-preview clip shows floating offshore behaviour in waves without relying on a long tutorial.

Hydrodynamic Diffraction

Wave Direction & Frequency Setup

The embedded reference highlights hydrodynamic diffraction settings and offshore response setup.

Original YouTube source →

Official Learning & Software References

Source pages for offshore hydrodynamics

Ansys webinar: hydrodynamic wave loading on offshore structures → Ansys Learning Hub: introduction to hydrodynamic analysis with Aqwa → DNV webinar: hydrodynamic analysis in offshore engineering → DNV local wave loads analysis →

Consulting Workflow

From Sea-State Definition to Offshore Design Recommendation

Every project is documented through geometry, environmental assumptions, mass properties, hydrodynamic setup, result interpretation and final recommendations.

Typical Output

A concise engineering report with motion plots, load tables, mooring trends, stability notes, assumptions and clear design actions.

01

Scope & Operating Conditions

Define the structure, water depth, wave headings, current, wind, draft, mass properties and expected decision output.

02

Hydrodynamic Model Setup

Build the offshore model, review wetted geometry, define wave spectra, assign mass data and configure boundary assumptions.

03

Response & Load Review

Evaluate motions, RAOs, mooring line tensions, offsets, load envelopes and sensitivity to sea-state assumptions.

04

Stability & Design Checks

Check CG, inertia, ballast assumptions, extreme response, freeboard risk and cases that should feed structural analysis.

05

Reporting & Recommendations

Deliver clear outputs that support offshore design decisions, redesign discussions, concept comparison or structural handoff.

Applications

Typical Projects

Floating offshore wind platforms

Semi-submersible structures

Mooring layout comparison

Wave-load screening studies

Offshore jacket support review

CG and inertia validation

Vessel motion assessment

Load handoff to structural FEA

Deliverables

What You Receive

Hydrodynamic Report

Assumptions, sea states, hydrodynamic setup, mass properties, boundary conditions and interpretation.

Motion & Load Tables

RAOs, motion response, mooring line trends, load envelopes and critical case comparisons.

Design Direction

Actionable recommendations for ballast, mooring layout, geometry, stability and follow-up structural checks.

Ready to Start?

Validate Offshore Response Before the Structure Meets the Sea

Send your offshore concept, geometry, mass properties, water depth, sea-state assumptions and design concerns. We will help define the right hydrodynamic scope and deliver practical offshore insight.

The media section connects offshore modelling examples, video previews and service outcomes in one consistent engineering workflow.

Request a Quote